Candle Wicks, Holders & Stickers
Click items at
right for related
products: |
|
|
Paper Core Wicks
 |
Photo shows wick inserted into Wick Tab/Holder (sold below).
Paper core wicks burn very hot, which yields a large melt pool. Usually used with paraffin wax containers. Large containers (over 4") may need more than one wick. |
WPC � $1.15
5 yds - use for up to 2" wide containers |
|
WPC.25 � $4.50
25 yds - use for up to 2" wide containers |
|
Square Braid Wicks
We recommend this wick for beeswax candles 1" to 1�" wide.
Wicks for beeswax candles generally have to be about double the width of wicks for paraffin candles of the same size. The wider wick produces the best flame-to-burn ratio, allows the candle to burn almost entirely and without tunneling. Monitor the length of the wick as it burns; it may require trimming to prevent burnout to the edge of your candle. Always use a catchplate or candle holder with catch space in case of hot wax run-off.
(Tunneling occurs when the wick burns down the center of the candle, leaving a thick outside wall of wax. Tunneling is caused by using a wick too small for the width of the candle.)
 |
Square braid cotton wick generally works best for beeswax sheet candles. This wick does not have a wire or metal core. |
W64A � $1.25
Square Braid Wick (15ft per pkg)
Makes 12-14 candles at 8" tall
- best for beeswax sheets |
|
W64B � $3.00
Square Braid Wick 60ft per pkg)
- best for beeswax sheets |
|
WSB � $1.25
Square Braid Wick 5/0 (5yd/pkg)
for use up to 1" wide container |
|
WSB.25 � $4.50
Square Braid Wick 5/0 (25yd/pkg)
for use up to 1" wide container |
|
WSB1 � $1.25
Square Braid Wick 1/0 (5yd/pkg)
for use up to 2-3" wide container |
|
WSB1.25 � $4.50
Square Braid Wick 1/0 (25yd/pkg)
for use up to 2-3" wide container |
|
WSB2 � $1.75
Square Braid Wick #2 (5yd/pkg)
for use up to 3-4" wide container |
|
WSB2.5 � $6.50
Square Braid Wick #2 (25yd/pkg)
for use up to 3-4" wide container |
|
Wick Holders
 |
These holders provide a sturdy base for your wick while pouring your wax. |
WCR1 � $4.95
Wick Tab/Holder (50/pkg) 15mm |
|
WCR2 � $7.00
Wick Tab/Holder (100/pkg) 15mm |
|
WCR3 � $25.00
Wick Tab/Holder (1lb~1200/pkg) 15mm |
|
Wick Tab Stickers
 |
These stickers are placed at the bottom of your candle mold to secure the wick tab/holder in place while pouring wax. |
WS101 � $6.25
Wick Tab Stickers (100 per pkg) |
|
Mold Sealers for Wax
Press approximately �" over the wick and screw to form a tight seal. This will prevent wax from leaking out and/or water from seeping in when using a water bath.
P161 � $1.95
Wax Mold Sealer - Gray
(1�" x 9")
|
 |
P162 � $4.05
Wax Mold Sealer - White
(2�" x 5" - folded in package)
|
 |
Metal Molds for Candle Making
CM1 � $10.25
Round Pillar Mold
(2"w x 3"h)
|
 |
CM2 � $15.25
Round Pillar Mold
(3.5"w x 3"h)
|
|
CM3 � $20.35
Round Pillar Mold
(3"w x 6.5"h)
|
|
| 
Portland Follow Us!
